Sherwin-Williams Finish 1 2.1 VOC Satin Clear Coat

By A Mystery Man Writer

Formulated specifically for force dry and air dry environments, the Sherwin Williams Finish 1 2.1 VOC Satin Clear Coat is a high-solids urethane automotive satin clear coat paint that meets VOC regulations at 2.1 VOC. This product creates a reduced gloss and even satin appearance, and it may be applied over base coats for a great look and feel across a variety of applications. To achieve optimal satin uniformity, users should shake this Sherwin-Williams auto clear coat paint for at least five minutes before reducing. It can also be mixed at a 4-to-1 ratio with a hardener, adjusting air pressure to 8 to 10 PSI (high volume, low pressure). High solids urethane satin clearcoat Designed for air dry and force dry environments Meets VOC regulation at 2.1 VOC Produces an even satin, reduced gloss appearance For satin uniformity, it is important to shake FC750 for 5 minutes before reducing Can be applied over basecoats Mix 4:1 with hardener Adjust air pressure to: HVLP: 8 - 10 psi Compliant: 22-34 inlet psi 1 gallon Clearcoat Use with 2.1 VOC Clear Coat Hardeners, Quart(SOLD SEPARATELY): FH741 Fast Hardener (55-75ºF) FH742 Medium Hardener (75-90ºF) FH743 Slow Hardener (90ºF +) NOTE: Satin clearcoat should not be final sanded or buffed, as it will damage the satin appearance Technical Data Sheet
Formulated specifically for force dry and air dry environments, the Sherwin Williams Finish 1 2.1 VOC Satin Clear Coat is a high-solids urethane automotive satin clear coat paint that meets VOC regulations at 2.1 VOC. This product creates a reduced gloss and even satin appearance, and it may be applied over base coats for a great look and feel across a variety of applications. To achieve optimal satin uniformity, users should shake this Sherwin-Williams auto clear coat paint for at least five minutes before reducing. It can also be mixed at a 4-to-1 ratio with a hardener, adjusting air pressure to 8 to 10 PSI (high volume, low pressure). High solids urethane satin clearcoat Designed for air dry and force dry environments Meets VOC regulation at 2.1 VOC Produces an even satin, reduced gloss appearance For satin uniformity, it is important to shake FC750 for 5 minutes before reducing Can be applied over basecoats Mix 4:1 with hardener Adjust air pressure to: HVLP: 8 - 10 psi Compliant: 22-34 inlet psi 1 gallon Clearcoat Use with 2.1 VOC Clear Coat Hardeners, Quart(SOLD SEPARATELY): FH741 Fast Hardener (55-75ºF) FH742 Medium Hardener (75-90ºF) FH743 Slow Hardener (90ºF +) NOTE: Satin clearcoat should not be final sanded or buffed, as it will damage the satin appearance Technical Data Sheet