Steelman 1/4-Inch Pneumatic 90-Degree Angle Die Grinder – Steelman

This rugged tool’s hardened spiral bevel gears and ball bearing construction produce a smooth-operating power tool with a 22,000 RPM peak free run speed.
The STEELMAN 1520 1/4 Inch 90-Degree Angle Pneumatic Die Grinder combines hardened spiral bevel gears with ball bearing construction to produce a smooth operating and easy to use hand held power tool. It features a powerful 0.5 HP motor that peaks with a 22,000 RPM free run speed and is controlled with a safety locking tease-trigger for precision control as well as protection from accidental startups. The one-piece body shell design simplifies maintenance by eliminating leak points and connections that can cause leaks over time. The 1/4-inch collet is set at a 90-degree angle to the body and is designed to accept a wide range of heads and bits to help you get the job done right with quick-swappable convenience. Highly efficient, the motor runs on a mere 4 cubic feet of compressed air at 90 PSI. The air inlet on the tool's base is threaded to accept a conventional 1/4-inch NPT fitting or quick disconnect coupler. Tool measures 6.5-inches long and weighs 1.5-pounds letting it get into tight spaces when needed all while not tiring out operators like heavier designs. IDEAL GRINDING TOOL - Ideal tool for when you need to remove rust and finishing steel and non-metal surfaces SAFETY TRIGGER LOCK - Safety trigger lock secures against accidental startup without impairing easy use 1/4-INCH COLLET - 1/4-Inch collet accepts a wide range of heads for a variety of uses FREE SPEED - Free running speed maximum is 22,000 RPM VARIABLE SPEED THROTTLE - Variable speed throttle for positive speed control via lever style tease trigger REDUCED MAINTENANCE - Single piece body shell design minimizes wear points and simplifies maintenance LOW AIR DEMAND - Operates on a mere 4 cubic feet per minute of 90 PSI compressed air PRODUCT SPECIFICATIONS Material: Metal Overall Dimensions: 6.00 in. L x 3.25 in. W x 1.34 in. H Item Weight (lb.): 1.15 Warranty: 1 Year Limited Warranty Country of Origin: Taiwan

Ingersoll Rand 1/4-in Collet Air Angle Die Grinder at

Steelman Pneumatic 3-Inch Cut-Off Tool With Metal Guard – Steelman Tools

Kobalt 1/4-in Die Grinder in the Air Grinders department at

CRAFTSMAN Craftsman 1/4-in Angle Die Grinder in the Air Grinders department at

AIRCAT Composite 3/4 HP 1/4 in. Right Angle Die Grinder with Spindle Lock 6280 - The Home Depot

Steelman 3/8-Inch 2-Gear Pneumatic Air Drill – Steelman Tools

Steelman Pneumatic 3-Inch Cut-Off Tool With Metal Guard – Steelman Tools

AIRCAT Composite 3 in. Cut-Off Tool 6505 - The Home Depot

STEELMAN 1/4-inch 90-degree Angle Pneumatic Die Grinder in the Air Grinders department at

YELWAY 1/4 Angle Air Die Grinder, 20000 RPM, 90 Degree Angled Air Die Grinder, Edge

Kobalt 1/4-in Angle Die Grinder in the Air Grinders department at

Steelman 5-Inch High Speed Pneumatic Disc Sander – Steelman Tools

Steelman Medium Barrel Pneumatic Hammer With Quick Change Retainer – Steelman Tools

SUNEX TOOLS 1/4 in. Angle Air Die Grinder SX232B - The Home Depot