Refrigerant Brass Flare Union and Nut Kit – Flobal

Applications: This fitting is designed to connect copper pipes or tubes and comes with 2 nuts. The copper tubing is pushed and expanded at the connection point  (45 degrees) with a flaring tool, then tightly connected to the body surface. This is a flare joint used for airtight applications such as refrigerant piping.
Applications:This fitting is designed to connect copper pipes or tubes and comes with 2 nuts. The copper tubing is pushed and expanded at the connection point  (45 degrees) with a flaring tool, then tightly connected to the body surface.This is a flare joint used for airtight applications such as refrigerant piping.Copper pipe joints for air conditioning to extend copper pipe length. Connects two copper pipes quickly with no welding required. Can be tightened with a wrench.MaterialCadmium-free material [Cadmium (Cd) 75ppm or less]C3604 free-cutting brass barRemarksMaximum working pressure: 7.0MPaNormal working pressure: 4.3 MPaOperating temperature range: -20°C to 150°C (-20°F to 150°F) *Non-freezing

JMF 5/8 in. Female Flare x 1/2 in. Dia. Male Flare Yellow Brass

Flare Union Kit - Joins two pipe kits together to extend the length

100X3 by Danfoss, Inverted Flare Tube Nut, 3/16 Tube OD

FLARE FITTINGS - HVAC Heating and Plumbing Supplies

Note the thread size: flare connector threads are UNF threads, which are straight threads, not taper NPT threads.flare thread size is a Nominal Pipe

Brass Tube Flare Fittings,Union Connector Gas Adapter, Brass Tube Coupler 1/2 inch Male Flare to 1/4 inch Male NPT 2 Pack

LTWFITTING Assortment Kit Tube OD 1/8" 3/16" 1/4" 5

Brass Flare Reducing Union 3/8 OD Female x 1/4 OD Male

2pcs 5/8 SAE Male Thread Brass Flare Tube Fitting Pipe Adapter

1/4 Inch Brass Fittings Forged Flare Female Nuts - China Brass

1563 by Danfoss, SAE 45° Flare/Inverted Flare Adapter

41FS-8 Dixon Valve Brass SAE 45 deg. Flare Fitting - Short Nut - 1

Flare Kit - Refrigerant Coupling Systems, Inc.