D2 - Desiccant Compressed Air Dryer

The D Series is a single tower desiccant air dryer designed for point-of-use applications.  The rust-free powder coated aluminum housing is made in Canada and includes built-in brackets.
DESCRIPTION The D Series is a single tower desiccant air dryer designed for point-of-use and intermittent flow applications.   The wet compressed air enters at the inlet, is first separated due to the off-set inlet creating centrifugal separation to trap water droplets, and subsequently passes around a polypropylene coalescer element, felt pads, and stainless-steel grids to remove solid particulates.  The air flows upward through a sewed filtration desiccant bag that acts as a sponge to absorb moisture.  Finally, the air flows again through the second filtration stage to eliminate any desiccant dust.  This 3-stage system efficiently provides separation, filtration, and drying. It is time to replace the cartridge when the Moisture Gauge indicates saturation.  The replacement is fast and mess-free, thanks to the US stainless-steel clamp.  The rust-free powder-coated aluminum housing is made in Canada and includes built-in brackets.  A superior alternative to Devilbiss DAD 500, Camair CT30, MP Filenco, Van Air Moisture Block. SPECS INLET / OUTLET PORTS: 1-1/2'' NPT AIRFLOW @ 100 PSIG: 150 SCFM MAXIMUM INLET PRESSURE: 150 PSI MAXIMUM INLET TEMPERATURE: 100°F (38°C) CRN: CERTIFICATIONS & PRESSURE RATINGS PRE-FILLED WITH DESICCANT CARTRIDGE PRESSURE GAUGES, SAFETY VALVE, AND BALL VALVE INCL. UNIT WEIGHT: 50 LB BOX DIMENSIONS: 22 x 12 x 9 PDF PDF    FAQ 1. How long does the cartridge last?Typically we recommend changing the cartridge at least once to twice every year (or every 2,000 hrs) when used for point-of-use applications with an intermittent flow.2. When do I know when to change the cartridge?Use our moisture indicator HGT-1/4 and replace the cartridge when the R.H. exceeds 80%.3. Can I regenerate the desiccant?We highly recommend replacing the desiccant with a fresh cartridge for optimal performance.  However, you may dry the desiccant by emptying the bag and leaving the activated alumina in an oven at 275 F for 4 hours (approximately).  Let the desiccant cool down before refilling the bag.  Use a commercial stapler to close the bag. 4. How can I extend the life of the cartridge?We recommend draining the tower daily by opening the ball valve or using our automatic timer drain TD-1/4.  When there are bulk liquids in the compressed air, a water separator FSD Series installed upstream of the dryer will knock water and prevent the flooding of the cartridge. 5. Can I oversize my air dryer?Yes, oversizing the air dryer will increase the time in between maintenance.

Van Air D20 Freedom Single Tower Compressed Air Dryer - 250 SCFM

45 CFM Desiccant Air Dryer

525CFM D3 Heatless Modular Low Dew Point Desiccant Air Dryer with Integrated After Filter By Nano - Warthog Air Compressor Store

DHA & CDA Series - Heat-Les Desiccant Dryers

Torque 065225 Air Dryer AD-9 AD9 Style Replaces 109685 F224680 26QE377 109685X, 12 V (TR065225) : Automotive

AirTak Desiccant Dryers

VAN AIR SYSTEMS, 1/2 in NPT, 16.2 cfm, Deliquescent Compressed Air Dryer - 447P52

Desiccant Air Dryer Toronto or Guelph - Compressed Air International

3.8m³/min Modular Air Compressor Desiccant Dryer

Torque Desiccant Cartridge for AD-9 Air Dryers (Replaces Bendix 107796, 107794, Haldex 107796) (TR107796) : Automotive

D2 - Desiccant Compressed Air Dryer