159F-6-6 Dixon Valve Brass SAE 45 deg. Flare Fitting - 45 deg. Elbow - — HoseWarehouse

By A Mystery Man Writer

159F-6-6 Dixon Brass SAE 45 deg. Flare Fitting is a 45 deg. Elbow, and has a 3/8" Tube Size x 3/8" Pipe Size. The economical fitting resists mechanical pullout, and is manufactured especially for hard to hold liquids and gases.

Features:
  • Reference SAE 010302.
  • Economical fitting resists mechanical pullout.
  • Easy to disassemble and may be reassembled repeatedly, for a leak-proof connection.
  • Manufactured from CA 360, CA 345, or CA377 brass.
  • Manufactured especially for hard-to-hold liquids and gases.
Specifications:
  • Listed with Underwriter's Laboratories for flammable liquid, marine, refrigeration and gas applications. Meets functional requirements of SAE J512 and J513, ASA and MS (Military Standards).
  • Temperature range: -65 deg. F to 250 deg. F
  • Working Pressure Ranges: Temperature and type of tubing used are important factors, the table below is a good guide for proper selection. The PSI rating given is based on a temperature of 73 deg. F using copper tubing.
Assembly Instructions:
  • Cut tubing squarely and clean tube end thoroughly to remove burrs.
  • Place nut onto tube. Place threaded end of nut toward end of tube.
  • Flare tube end with flaring tool to provide 45 deg. flare.
  • Clamp tube flare between nut and nose of fitting body by screwing nut on finger-tight. Tighten with a wrench an additional 1/4 turn for a metal-to-metal seal.
Working Pressure Ranges:
PSI Tube OD Tube Wall
1400 1/4 .030
1000 3/8 .032
750 1/2 .032
650 5/8 .035
550 3/4 .035
Part Number Tube Size Pipe Size Straight Thread PSI Min/Max Temp Material Weight (Lbs)
159F-4-4 1/4 1/4 7/16-20 1400 (95.24 bar) -65 deg. F / 250 deg. F (-53.89 deg. C / 121.11 deg. C) Brass 0.0700
159F-6-4 3/8 1/4 5/8-18 1000 (68.03 bar) -65 deg. F / 250 deg. F (-53.89 deg. C / 121.11 deg. C) Brass 0.0950
159F-6-6 3/8 3/8 5/8-18 1000 (68.03 bar) -65 deg. F / 250 deg. F (-53.89 deg. C / 121.11 deg. C) Brass 0.1000
159F-8-4 1/2 1/4 3/4-16 750 (51.02 bar) -65 deg. F / 250 deg. F (-53.89 deg. C / 121.11 deg. C) Brass 0.1200
159F-8-6 1/2 3/8 3/4-16 750 (51.02 bar) -65 deg. F / 250 deg. F (-53.89 deg. C / 121.11 deg. C) Brass 0.1250
159F-8-8 1/2 1/2 3/4-16 750 (51.02 bar) -65 deg. F / 250 deg. F (-53.89 deg. C / 121.11 deg. C) Brass 0.2300

166FSV-4-4 Dixon Valve Brass SAE 45 deg. Flare Fitting - 90 deg. Swive — HoseWarehouse

SAE 45° Flare Fitting, Union, Brass, 3/8, 5/8-16 Thread

★1.【PACKAGE INCLUDES】 ----- This set contains 1pc 1/4 brass flare cap, 1pc 3/8 brass flare cap, 1pc 1/2 brass flare cap, 1pc 5/8 brass flare cap, 1pc

5Pcs SAE Brass Flare Cap Tube Fitting Set 45 Degree Flare Cap Gas Line Cap Brass Hydraulic Fitting Set 1/2 1/4 3/8 5/8 5/16 OD

Brass Fittings - SAE 45' Flair

Rustark 5Pcs SAE Brass Flare Cap Tube Fitting Set 45 Degree Flare Cap Gas Line Cap Brass Hydraulic Fitting Set 1/2 1/4 3/8 5/8 5/16 OD : Industrial & Scientific

3/8 x 3/8 Brass Grip-Tite Hose Barb - Female 45° SAE Inverted Flare Connector 736-66 - Prairie Bearing & Bolt

Dixon 159F-6-6 Brass SAE 45° Elbow Flare Fitting, 3/8 Tube, 3/8 Pipe, 5/8-18 Straight: : Industrial & Scientific

Dixon 159F-8-6-pk5 SAE 45 Degree Elbow Flare Fitting 1/2 Tube, 3/8 Pipe, 3/4-16 Straight (Pack of 5): : Industrial & Scientific

AF572-06DBLK - 45 DEG -6AN FULL FLOW TEFLON

Female 45°SAE/37°JIC Swivel x Push-on Hose Barb

249F-6-8 - Brass 45° Flare Fittings

SAE 45 Degree Brass Fittings

159F-6-6 Dixon Valve Brass SAE 45 deg. Flare Fitting - 45 deg. Elbow - — HoseWarehouse

©2016-2024, doctommy.com, Inc. or its affiliates