6.5 PRC

6.5 PRC ADG Brass was designed not only for consistency, but for durability. Made in the USA! Get your ADG brass at TODAY!
50 count box Standard Annealed Finish   6.5 PRC (Precision Rifle Cartridge)  ADG manufactured brass is optimized not only for consistency in performance, but also for durability.  One of the ways we accomplished this is by optimizing the material in specific areas to strengthen it.  With the optimized material geometry, our brass will generally have a different case volume than most other manufacturer’s brass and therefore will require a different charge weight to achieve the same pressures and velocities.  We recommend using a reputable load data source and working up from their recommended minimum starting loads.   We recommend reducing any existing charge weights by 10% and re-developing your specific load when replacing any component in a load recipe with a new component (brass, projectile, primer, or powder type).  Failure to reduce charge weights established using other manufacturers brass may result in higher pressures and velocities while using ADG brass and may result in unsafe pressure levels.      

6.5 PRC (50 ct.) Brass

6.5 PRC vs .300 PRC - Shooting Times

Head to Head: 6.5 PRC vs. 6.8 Western

Norma Golden Target Ammunition - 6.5 PRC, 143 gr, GTX, 2986 fps

The 6.5 PRC: Complete Cartridge Profile and Ballistic Data – Backfire

New Hornady 6.5 PRC — Precision Rifle Cartridge - Sporting Shooter

Norma Golden Target, 6.5 PRC, 143gr

/medias/1761175-1-base-conversio

Norma Ammunition - Whitetail - 6.5 PRC - 140 Grain - Pointed Soft Point